The Sandvik Coromant R245 K20W right-hand carbide indexable milling insert has a square shape, is available with a KL, MM, KM, or KH chipbreaker, and provides good shock resistance without limiting wear resistance in light, medium, or heavy machining of gray cast iron in average machining conditions at low to moderate cutting speeds. A combination of carbide and a thin multilayer coating of titanium carbon nitride (TiCN), aluminum oxide (Al2O3), and titanium nitride (TiN) applied through medium temperature chemical vapor deposition (MTCVD) performs well at low to moderate cutting speeds with coolant. MTCVD coatings are deposited at lower temperatures than chemical vapor deposition (CVD) coatings, resulting in the appearance of few or no cracks in the coating and providing improved toughness and smoothness compared to CVD coatings. This positive insert is used with the CoroMill 245, a screw-style insert holding system for use in face milling applications. The insert has a square shape that provides strong cutting edges. The chipbreakers available with this insert provide a range of edge performances. The light-machining KL chipbreaker, medium-machining KM chipbreaker, and heavy-machining KH chipbreaker are available with an M edge performance type for highest security. The medium-machining MM chipbreaker is available with a K edge performance type for high cutting sharpness. The insert has a hole in the center, four cutting edges, and a 29-degree clearance angle. Milling inserts are coded according to their specific cutting and application capability (e.g., R245-12 T3 M-KH). Each section of the code represents details of the insert: hand, compatible toolholder series, insert width, insert thickness, edge performance, and chipbreaker style. Insert shapes and sizes may have different inscribed circle (iC) measurements, which relate to ranges of cutting depths, speeds, lead angles, and feed rates. The iC is the largest circle that can be drawn within the edges of the insert shape. Generally, as the insert size and the iC become larger, the maximum cutting depth increases. Cutting depth influences the metal removal rate, the number of cuts, chip evacuation efficiency, and power required when using the insert. Indexable inserts are small cutting tools designed to remove material in external and internal cutting applications such as turning, milling, drilling, and grooving. They are held by an insert holder, have multiple cutting edges, and can be rotated when one edge wears down. Multiple inserts can accomplish a variety of cuts in one operation. An insert is either positive or negative, which refers to the rake or clearance angle at which the insert removes material. Sandvik Coromant produces tools for turning, milling, and drilling. Headquartered in Sweden and represented in 130 countries, the company manufactures tools used throughout the metalworking field, including the automotive and aerospace, die and mold, and general engineering industries. Matching Inserts to Holders These inserts are used with the Sandvik Coromant CoroMill 245, a screw-style insert holding system. This system is for light- to medium-machining face milling and mirror-finishing applications. It is also available with exchangeable cassettes for use in roughing and semi-finishing operations. When used with the CoroMill 245, this insert has a 45-degree lead angle and 45-degree entering angle, giving a smooth entry into the cut and producing a thinner chip than an insert with a larger lead angle. The radial and axial cutting forces are balanced, limiting vibration in long overhangs and in smaller or weaker setups.
- Used with the Sandvik Coromant CoroMill 245 for light-, medium-, or heavy-machining face milling on gray cast iron in difficult-to-average machining conditions
- K20W grade is a medium temperature chemical vapor deposition (MTCVD) coating of titanium carbon nitride (TiCN), aluminum oxide (Al2O3), and titanium nitride (TiN) over carbide that provides good shock resistance without limiting wear resistance and performs well at low to moderate cutting speeds with coolant
- Choice of light-machining (KL), medium-machining (MM or KM), or heavy-machining (KH) chipbreaker to help prevent chip buildup
- Square shape has strong cutting edges
- Screw-style mounting for secure clamping
- Maximum cut depth: 0.256 inches
Brand: Sandvik Coromant
Product ID: 1117168713318456
Product Dimensions: 4cm x 4cm x 1.1cm
- Free delivery Australia wide
- 24/7 parcel tracking
- Customer support
- Full factory warranty
- Easy returns
- Secure checkout
Information above was provided by the manufacturer or local distributor.
Please check the packaging and read instructions prior to using the product.
Found an error with this listing? Let us know.